User's Manual

MDS 05-3627A01, Rev. D LEDR Series I/O Guide 57
This sends the configuration file to a TFTP server running on host
192.168.1.14 and stores it as a file called config.txt.
date Date
Usage:
date [MM/DD/YYYY]
This command sets or displays the date and time of the radio’s internal
real-time clock. The real time clock operates from an internal lithium
battery so it is running even if the radio has no DC power connected. The
date format may also be set or displayed from this screen for one of three
formats: U.S., European, or generic.
The real time clock is fully compliant with year 2000 standards.
Subcommands:
date format [<1-3>]
Date Format 1: mm/dd/yyyy (All numbers)
Date Format 2: dd/mm/yyyy (All numbers)
Date Format 3: dd-MON-yyyy (English abbreviation of month)
Example Response:
date: 07-JUN-1999 08:11:30
dtmf Dual Tone, Multi-Function tone selection
Usage:
dtmf [on|off]
This command is used to turn the DTMF signaling feature on or off.
eia530 EIA-530 selection
Usage:
eia530 [rts <on|off>] [dtr <on|off>]
This command is used to set or display the status of the EIA-530 control
lines (RTS and DTR).
ethernet Ethernet Port’s Hardware Address
Usage:
ethernet
This command displays the fixed hardware address of the radio’s
Ethernet port. This address is globally unique; it is assigned at the fac-
tory and cannot be changed.
events Events
Usage:
events [subcommand] [<arguments>]
Subcommands: pending
filter [event#] [count]
init
desc [<event#>]
530