User's Manual

05-4819A01, Rev. 08 LCT 450 Installation/Operation Guide 27
12.5 kHz B/W: 9K30F1D, 9K30F2D, 9K30F3D
25.0 kHz B/W: 16K5F1D, 16K5F2D, 16K5F3D
DATA CHARACTERISTICS
(P1 Control Interface Connect)
Payload Signaling Type: CCITT V.23
Connector Types: DB-25 Female
Payload Data Rate: 1200 bps
DATA CHARACTERISTICS
(P2 Programming & Diagnostic Port)
Connector Type: DB-9F
Signaling Standard: RS-232
PRIMARY POWER
Voltage: 13.6 Vdc (+/- 15%)
Negative-Ground Systems Only
TX Supply Current: 8 Amperes (Typical) @ 30 Watts Output
RX Supply Current: Operational—125 mA, Nominal
Power Connection: 5-inch “pigtail” (14 AWG) with Tyco/AMP
connector (Part No. 172129-1)
Fuse: 8-Ampere, internal