User's Manual

05-4819A01, Rev. 08 LCT 450 Installation/Operation Guide 9
AUDIO [ON/OFF]
Audio Monitor/Orderwire Status
Used to set or display Audio Monitor/Orderwire functionality (on or
off)
BOOT [1, 2, OTHER]
Reboot Radio
Used to reboot to selected image or current image if no image speci-
fied.
CHAN [0-8, ALL]
[RXFREQ xxx.xxxx]
(MHz)
[TXFREQ xxx.xxxx]
(MHz)
[PWR [5, 20, 25, 30]
(Watts)
[BW [12.5, 25]
(kHz)
Channel Mods...
If only the first argument is given, then it displays the channel(s)
parameters. If a third (or greater) argument is given, then that channel
with have its parameters changed.
CKEY [ON/OFF] - Digital Only
Key TX Continuously
The
CKEY
command enables or disables the continuously keyed func-
tion of the radio. When
CKEY
is set to
ON
, the radio is continuously
keyed and the Timeout Timer is disabled.
CTS [0-255]
Clear-to-Send Time
The CTS (clear-to-send) command selects or displays the timer value
associated with the CTS line response. The command parameter
ranges from
0 to 255 milliseconds.
For DCE operation, the timer specifies how long to wait after the RTS
line goes high, before the radio asserts CTS and the DTE can transmit
the data. A CTS value of zero keys the radio and asserts the CTS line
immediately after the RTS line goes high.