User's Manual

MDS 05-2806A01, Rev. E.1 MDS iNET 900 Series User’s Guide 75
3.7.1 Approved Remotes/Access Points List Menu
This menu is the same for both Access Points and Remotes and the
names change to reflect their mode. Replace “Remotes” with Access
Points” in the following description.
NOTE: The limit for remotes (in an Access Point) is 255.
The limit for Access Points (in a remote) is 104.
Figure 3-38. Approved Remotes List Menu
• Add Remote—Enter MAC address of Remote.
[
Any valid 6-digit hexadecimal MAC address; 00:00:00:00:00:00]
• Delete Remote—Enter MAC address of Remote.
For security purposes, you may want to delete a stolen or depro-
visioned radio.
•
Add Associated Remotes—Add all currently associated remotes to
the approved remote list. Alternatively, you can enter each
Remote MAC manually.
•
Delete All Remotes—Remove (complete purge) of all Remotes
from current list.
•
View Approved Remotes—Simple listing of approved Remotes by
MAC address, of radios authorized to join this AP. If a Remote
is not in this list, it will not be able to associate with this AP.
•
Save Changes—Save all changes made during this session with
this menu. Changes will be implemented only if they are
“saved” before exiting this menu.