User's Manual

38 MDS iNET 900 Series User’s Guide MDS 05-2806A01, Rev. E.1
• Radio Configuration—Tools to configure the wireless (radio)
layer of the transceiver. (See “Radio Configuration Menu” on
Page 48)
•
Serial Gateway Configuration—Tools to configure the two serial
ports. (See “Serial Data Port Configuration Menu” on Page 59)
•
Security Configuration—Tools to configure the security services
available with the transceiver’s environment. (See “SECURITY
CONFIGURATION” on Page 73)
•
Device Information—Top level user-specific and definable param-
eters, such as unit password. (See “Device Information” on
Page 38)
•
Performance Information—Tools to measure the radio and data
layer’s performance of the radio network. (See “Performance
Information Menu” on Page 76)
•
Maintenance/Tools—Tools to use configuration files, change
firmware and use Authorization Keys to change major unit
capabilities. (See “Authorization Key—Alter the unit’s overall
capabilities by enabling the built-in resources.
(See “Authorization Keys Menu” on Page 105)” on Page 91)
3.3.3 Configuring Basic Device Parameters
Device Information
Below is the menu/screen that displays basic administrative data on the
unit to which you are connected. It also provides access to some user-
specific parameters such as device names.
Figure 3-11. Device Information Menu
• Model Number (Display only)
• Serial Number (Display only)
• Hardware Version (Display only)
• Firmware Version (Display only)—Current firmware installed and
being used by the transceiver.