User's Manual

42 MDS TransNET I&O Guide MDS 05-2708A01, Rev. D
In the USA, a maximum of four zones may be skipped for TransNET 900 and
a maximum of three zones may skipped for TransNET 2400. Check the regu-
latory requirements for your region. The SKIP function may not be permitted
in your country and the radio will not respond to the SKIP command.
SLEEP [ON, OFF]
Transceiver Sleep—Remotes Only
This command is used to set or display the radio’s Sleep Mode setting. The
default setting is SLEEP OFF. When this setting is ON (enabled) the
Low-Power, or RTU-forced Sleep Mode, can be used. This function cannot
be turned on for a Master or Extension radio unless the unit is in the
Low-Power Mode. See “Using the Radio’s Sleep Mode (Remote Units
Only)” on Page 59 and “Low-Power Mode versus Remote’s Sleep Mode” on
Page 62 for more information.
SREV
Firmware Revision Level
This command displays the version of the firmware currently loaded into the
transceiver.
Table 13. 900 MHz Frequency Skip Zones
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8
902.2
to
905.2
905.4
to
908.4
908.6
to
911.6
911.8
to
914.8
915.0
to
918.0
918.2
to
921.2
921.4
to
924.4
924.6
to
927.6
Table 14. 2400 MHz, Band A, Frequency Skip Zones
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8
2401.6
to
2404.6
2404.8
to
2407.8
2408.0
to
2411.0
2411.2
to
2414.2
2414.4
to
2417.
2417.6
to
2420.6
2420.8
to
2423.8
2424.0
to
2427.0
Table 15. 2400 MHz, Band B, Frequency Skip Zones
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8
2427.2
to
2430.2
2430.4
to
2433.4
2433.6
to
2436.6
2436.80
to
2439.8
2440.0
to
2443.0
2443.2
to
2446.2
2446.4
to
2449.4
2449.6
to
2452.6
Table 16. 2400 MHz, Band C, Frequency Skip Zones
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8
2452.8
to
2455.8
2456.0
to
2459.0
2459.2
to
2462.2
2462.4
to
2465.4
2465.6
to
2468.6
2468.8
to
2471.8
2472.0
to
2475.0
2475.2
to
2478.2