Installation Manual

3-26 Installation
MK-MAN-01 CarrierWave Digital Radio
8. Turn the –48 V dc supply off.
9. Connect the IDU to the laptop computer, using the Cat-5 Ethernet crossover cable or connect
the IDU to a computer network, using a normal Cat-5 Ethernet cable. Connect the Ethernet
cable to OAMP 10/100BaseTX Ch1 connector on the IDU rear panel. Refer to Figure 3-16
for the IDU rear panel connections.
Figure 3-15. IDU DC Power Cable Connector
Figure 3-16. IDU Rear Panel – CarrierWave-100/Ethernet
3.7.2.3 Setting the IDU IP Address
Use the Front Panel Menu to set the IDU IP address as follows:
1. Power up the IDU and wait for the main menu to appear on the front panel. The menu will be
titled “CarrierWave” and will have several elements, beginning with “Modify Config”.
2. Use the Down arrow key to move the cursor (asterisk or *) three times to scroll it down until it
is aligned with the “Super User” menu item. When the cursor is opposite the Super User
item, press the Enter key.
3. On the Super User menu, move the cursor down and select the “Chg OA&M Params” item.
4. On the “OA&M Params” menu, move the cursor down to the IP: line. Use the right arrow key
to move the cursor into the IP address area. When you see the underline cursor beneath a
character, you can use the up/down keys to change that character. Continue moving back
and forth with the left/right keys and changing the characters as necessary with the up/down
2 1