User's Manual

30 MDS 9810 Installation and Operation Guide MDS 05-3301A01, Rev. C
Invisible place holder
Figure 23. HHT setup display
2. The first of 15 menu items will be displayed. Settings can be
reviewed by pressing the NEXT function ( key). Parameter set-
tings can be changed by pressing the ROLL function ( key).
3. Set up the HHT as listed in Table 5.
4. Exit the HHT setup mode by pressing for Exit, or by pressing the
(Roll) key after the final menu item has been reviewed.
6.3 Keyboard Commands
Table 6 is a reference chart of software commands for the transceiver.
See Section 6.4 for detailed command descriptions.
Entering Commands
The proper procedure for entering commands is to type the command,
followed by an keystroke. For programming commands, the
command is followed by and the appropriate information or
values, then
.
Z
E
A
Table 5. HHT Operational Settings
Parameter Setting Parameter Setting
Re-init HT NO Scroll On 33rd
Baud Rate= 1200 Cursor ON
Comm bits= 8,1,n CRLF for CR OFF
Parity Error OFF Self Test SLOW
Key Repeat OFF Key Beep ON
Echo OFF Screen Size 80
Shift Keys YES Menu Mode LONG
Ctl Chars PROCS
C
A
ENTER
SPACE
ENTER