User Manual

User Reference and Installation Manual 2-9
MDS 5800 II
Alarm/Serial Interface
Alarms/Serial DB-15HD female connector for two Form-C relay alarm
outputs (rated load: 1A @ 24 VDC), two TTL alarm outputs,
four TTL alarm inputs, and Serial Console. The two Form-C
relay alarm outputs can be configured to emulate TTL alarm
outputs.
USB Interface
USB USB connector, optional.
Voice Orderwire Connector
Voice
Orderwire
Call
Call button to alert operator at link-partner SDIDU
TM
of
incoming Voice-Orderwire call.
Voice
Orderwire
RJ-11 modular port connector for voice orderwire interface.
NMS 10/100 Network Management System Connections
10/100 LOC 10/100Base-TX RJ-45 modular local port connector for access
to the Network Management System (SNMP) and GUI.
10/100 CPT 10/100BaseTX RJ-45 modular remote port connector for
access to the Network Management System (SNMP). This
port to be used for consecutive point networks.
100/Ethernet Models: Ethernet 100BaseT Connections
100Base-TX
LOC
100Base-TX RJ-45 modular port connector for the local Fast
Ethernet interface.
100Base-TX
CPT
100Base-TX RJ-45 modular port connector. This port to be
used for consecutive point networks.
T1 Channels
T1 1-2 Two T1/E1 (RJ-48C) interface connections.
T1 3-16 Fourteen T1/E1 high density interface connector