Installation Guide

ManualsBrandsGE Lighting ManualsTILECDENGE Lighting CYNC Hexagon Panel

Before You Get Started

Important Note: Properly Connect Your Panels.

Read these instructions completely and carefully.

Your Hexagon Panels include two type of ports: Input Ports and Output

Ports. Your linking cables must be properly installed to ensure that each

Hexagon Panel has power. Here’s what to know:

Input Ports are identiﬁed with an arrow.

Power comes INTO this port. Connect the control box (ﬁrst panel) or the

linking cable from the previous Hexagon Panel into the port marked with

an arrow.

Output Ports are identiﬁed with numbers.

Power LEAVES through this port to provide power to the next Hexagon

Panel in your design. Connect the linking cable to any one of the 5 ports

to power the next Hexagon Panel in the sequence. Select the Output Port

closest to the Input Port on the next Panel.

CYNC Hexagon Panel Installation Guide

Let’s Do It

(7) Light

Panels

(5) Light

Panels

(10) Light

Panels

(9) Linking

Cables

(10) Layout

Templates

Control

Box

Power

Adapter

Panel

Remover

Tool

Orientation

Tool

Cleaning

Wipe

Orientation

Tool

Cleaning

Wipe

Panel

Remover

Tool

Level

Control

Box

Power

Adapter

Level

(7) Layout

Templates

(5) Layout

Templates

(30) Traceless

Nails

(21) Traceless

Nails

(15) Traceless

Nails

(6) Linking

Cables

(5) Linking

Cables

(12) Adhesive

Strips

(9) Adhesive

Strips

(6) Adhesive

Strips

(2) Control

box mounting

screws

(2) Control

box mounting

screws

10 Pack

7 Pack

What’s

Included:

5 Pack

Expansion

GE is a trademark of General Electric Company. Used under trademark license.

Note:

One power adapter can power up to 20 Hexagon Panels. For any pattern

needing

more than 20 tiles of Hexagon Panels, you will need to purchase

an additional set with an additional power adapter.

Panels are connected in sequence. Do not use more than one Output

Port on each Hexagon Panel.

Summary of content (4 pages)

PAGE 1
CYNC Hexagon Panel Installation Guide Let’s Do It What’s Included: 10 Pack (10) Light Panels (12) Adhesive Strips (9) Linking Cables (30) Traceless Nails (10) Layout Templates (2) Control box mounting screws Control Box Power Adapter Level Panel Remover Tool Orientation Tool Cleaning Wipe 7 Pack (7) Light Panels (9) Adhesive Strips (6) Linking Cables (21) Traceless Nails (7) Layout Templates (2) Control box mounting screws Control Box Power Adapter Level Panel Remover Tool Orientatio
PAGE 2
Installing the First Hexagon Panel The CYNC App walks through Hexagon Panel layout and installation step by step. Start with the CYNC App for the best experience. Use these instructions for reference. 1. Ensure the control box has been connected to the first Hexagon Panel. 4. Remove the 1st Layout Template from the wall. Leave the other templates in place for now. 2. Determine the Output Port to connect to the 2nd Hexagon Panel.
PAGE 3
Installing Final Panel 1. Rotate the final Hexagon Panel so that the Input Port side aligns with the Output Port of the previous Hexagon Panel. 2. There’s no Output Port connection required for this Hexagon Panel. 3. Remove the last Layout Template from the wall. How to use the Tile Removal Tool 4. As with the middle Tiles, after inserting the linking cable from the previous Tile, note that the panel should light up if the cable is connected correctly.
PAGE 4
Additional Information and Warnings FCC Compliance Statement Compliance Notice: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.