User Guide

Information provided is subject to change without notice. Please verify all details with GE. All values are design or typical values when measured under
laboratory conditions, and GE makes no warranty or guarantee, expressed or implied, that such performance will be obtained under end-use conditions.
GE
Lighting
GE’s replacement lamps dimmer information
To learn more about saving money and energy,
go to: gelighting.com/ThinkLED
When you Think LED lighting, Think GE.
Dimmable 2.2-watt candles
Dimmable 3.5-watt and 4.5-watt Decorative lamps (25-watt replacement)
Dimmable 4.5-watt Decorative lamps (40-watt replacement)
Dimmable 9-watt, 13-watt and 27-watt Omni/Semi-Omni directional A-19 lamps
Dimmable 7-watt and 11-watt Omni/Semi-Omni directional A-19 lamps - Generation 1
Dimmable 7-watt and 11-watt Omni/Semi-Omni directional A-19 lamps - Generation 2
Dimmable 7-watt and 11-watt ENERGY STAR
®
Omni/Semi-Omni directional A-19 lamps - Generation 3
Dimmable 7-watt and 11-watt Value Omni/Semi-Omni directional A-19 lamps - Generation 3
Dimmable 7-watt MR16 lamps (Includes 7X) - Generation 2
Dimmable 10-watt and 12-watt Reector lamps - BR30 - Generation 1
Dimmable 10-watt and 12-watt Reector lamps - BR30 - Generation 2
Dimmable 13-watt Reector lamps - BR40
Dimmable 7-watt RS20 Reector lamps
Dimmable 4.5-watt PAR16 and GU10 lamps - Generation 1
Dimmable 6-watt GU10 lamps - Generation 2
Dimmable 7-watt PAR 20 lamps - Generation 1
Dimmable 7-watt PAR 20 lamps - Generation 2
Dimmable 10-watt PAR 30 lamps
Dimmable 12-watt High Output, Retail and Commercial PAR30 lamps - Generation 1 and 2
Dimmable 12-watt and 18-watt Retail PAR 38 lamps
Dimmable 12-watt and 18-watt Commercial PAR 38 lamps - Generation 1
Dimmable 12-watt and 18-watt Commercial PAR 38 lamps - Generation 2
Dimmable 26-watt Commercial PAR 38 lamps
Dimmable CFL Spiral
®
and CFL R30/R40/PAR38
The ratings used in the attached tables are denes as follows:
“PASS” means during testing through the dimming range (and when the dimmer was used with the number of lamps specied in the table), there was smooth
transition of light dimming, no sign of icker, and no audible noise at 3 feet.
ADD LAMPmeans ickering was observed during testing when the dimmer was used with the number of lamps specied in the table.
“N/A means the total power of the lamps number specied in the table exceeds dimmer recommended power.
IMPORTANT NOTICE - Because dimming equipment, applications, and conditions of use are many, varied, and beyond GE’s control, this information necessar-
ily is based on limited sample sizes and testing, and GE does not represent or warranty the suitability of a lamp for any particular application or use in any
particular equipment. This information may be updated and changed at any time without notice as new equipment and information is developed.
2
2
3
4-5
6
7-8
9
10
11-12
12
13
14
15
16
17
18
19
20
21-22-23
24-25
26
27
28
29

Summary of content (30 pages)