User Guide

Installation Instructions Document No. 466-1574.
30
2. Press
Option # 16
.
3.
Enter the number of days
between each auto
p
hone test (3 di
g
its must be entered).
To set system option 17:
1. Press
Add
from the Start menu.
2. Press
Option # 17
.
3.
Enter the dialer delay
in seconds (3 di
g
its must
be entered).
To set system option 18:
1. Press
Add
from the Start menu.
2. Press
Option # 18
.
3.
Enter the alarm cancel time
in minutes (2 di
g
-
its must be entered).
To set system option 19:
1. Press
Add
from the Start menu.
2. Press
Option # 19
.
3.
Enter the supervisory time
in hours (2 di
g
its
must be entered).
To set system options 20 - 26, 28 - 30, and 32:
1. Press
Add
from the Start menu.
2. Press
Option # XX
.
3. Press
DONE
.
To set system option 27:
1. Press
Add
from the Start menu.
2. Press
Option # 27
.
3.
Enter the ring/hang/ring number
.
To set system option 31:
1. Press
Add
from the Start menu.
2. Press
Option # 31
.
3. Enter the day of week number.
To set system option 33, 38, 40-42:
1. Press
Add
from the Start menu.
2. Press
Option # XX
.
3. Press
DONE
.
To set system options 34-37:
1. Press
Add
from the Start menu.
2. Press
Option # XX
.
3. Press
Hours
and
Minutes
to set the time.
4. Press
DONE
.
To set system option 39:
1. Press
Add
from the Start menu.
2. Press
Option # 39
.
3. Enter the minutes (2 di
g
its must be entered).
To set system option 43:
1. Press
Add
from the Start menu.
2. Press
Option # 43
.
3.
Enter a phone number
with the red numbered
ke
y
s. Press
Test
to enter a
p
ause in the
p
hone
number.
Note: The phone number is automatically stored after
you’ve pressed 22 digits. You will not have to press DONE
to store the number. If the number is less than 22 digits,
then DONE must be pressed.
To set system option 44:
1. Press
Add
from the Start menu.
2. Press
Option # 44
.
3.
Enter phone mod number
.
To set system option 45 - 53:
1. Press
Add
from the Start menu.
2. Press
Option # XX
.
3. Press
DONE
.
To delete options:
1. Press
Delete
from the Start menu.
2. Press
Option
from the Main menu until
y
ou hear
the name
y
ou want to delete or use the red num-
bered ke
y
s to
g
o directl
y
to the o
p
tion.
3. Press
DONE
. The s
y
stem confirms the item
y
ou
deleted.
Programming System Access Codes
Use Table 7 on
p
a
g
e 12
,
which was filled out durin
g
the s
y
stem
p
lannin
g
, to
p
ro
g
ram s
y
stem Access
Codes.
To add a code:
1. Press the
Add
button.
2. Press the
Access Code
button. Continue
p
ressin
g
the Access Code button until
y
ou hear the access
code to be chan
g
ed.
3. Press
DONE.
4.
Enter the new access code
b
y
usin
g
the red
numbered ke
y
s.