User Guide

ManualsBrandsGE INTERLOGIX ManualsOtherSIMON 2

Installation Instructions Document No. 466-1574.

Option 37: Sensor Activated Light Lockout Stop

Time*

Add

enables sensor activated li

ht lockout sto

time.

The

anel will not turn on a li

ht, between the

ro-

rammed start time (o

tion 36) and the

rammed

sto

time (o

tion 37), even if sensor activated li

hts

are on.

Both options must be programmed for this

option to work correctly.

Delete

disables sensor activated li

ht lockout sto

time. The

anel will turn on a li

ht activated b

a sen-

sor at all times if sensor activated li

hts are enabled.

Option 38: Auto Arm

Add

enables auto arm. An

sensor that re

uires resto-

ral and is o

en when the

anel is armed will automat-

icall

be b

assed when the

anel is done

rotestin

The

anel will

rotest for 4 minutes, then auto arm.

Pressin

the ARM Doors & Windows button a second

time will sto

the control

anel

rotest and auto arm

the s

stem. Pressin

this button a third time will arm

with no entr

dela

. The

anel will

o into alarm if an

instant alarm sensor is o

ened durin

an exit dela

. A

sensor learned as t

e 26 can never be b

assed.

Delete

disables auto arm. An

sensor that re

uires

restoral and is o

en when the exit dela

ires will

automaticall

be b

assed. Bee

s indicatin

the arm-

level will sound four times when the control

anel

is armed and one time when the exit dela

ends. The

anel will

o into alarm if an instant alarm sensor is

ened durin

an exit dela

. A sensor learned as t

26 can never be b

assed.

Option 39: Siren Time Out

Add

rams siren time out from 1 to 30 minutes.

The default siren time out is 4 minutes.

Delete

siren never time out.

Option 40: Trouble Beeps

Add

enables trouble bee

s. If there is a trouble condi-

tion, six bee

s will sound ever

minute. If the

anel is

armed, disarmed, or status is

ressed, the trouble

bee

s will sto

and then resume 4 hours later.

Trouble bee

s will be heard if:

• There is AC

ower failure.

• The CPU batter

is low.

• There is a sensor failure.

• There is sensor trouble.

• There is a fail to communicate

roblem.

• The no activit

timer has timed out. Trouble

bee

s will continue for 5 minutes and if the

anel

does not see activit

, the trouble bee

s will sto

and the

anel will call the CS to re

ort the no

activit

Delete

disables trouble bee

s, so that if a

roblem oc-

curs the control

anel will not notif

the owner with

trouble bee

Option 41: Chime Voice

The

anel has two chime modes which ma

be en-

abled b

ressin

the a

riate button on the

anel.

CHIME Doors

Chime doors is a chime sound (two bee

s) that will be

emitted from the interior siren out

ut, the

anel siren,

SWS, and the X-10

owerhorn siren (if set to unit #9)

when a door/window sensor which is t

e 10 or 13 is

activated. If there are no sensors learned as t

e 10 or

13, this function will not be available. The

anel will

announce which sensor was tri

ed if chime voice is

on and the sensor was o

ened while the

anel is dis-

armed.

CHIME Special Motion*

Chime s

ecial motion is a chime sound (three bee

that will be emitted from interior siren out

ut, the

anel siren, SWS, and the X-10

owerhorn siren (if

set to unit #9) when a chime sensor that is t

e 25 is

activated (the alarm state is sent to the

anel). If there

are no sensors learned as t

e 25, this function will

not be available. The

anel will announce which sen-

sor was tri

ed if chime voice is on and the sensor

was o

ened while the

anel is disarmed.

Add

enables chime voice. The

anel will announce

which chime sensor has been tri

ed if the chime fea-

ture is enabled.

Delete

disables chime voice. The

anel will not an-

nounce which chime sensor has been tri

ed even if

the chime feature is enabled.

Option 42: Speaker Level*

Add

sets s

eaker level to the hi

h voice level.

Delete

sets the s

eaker level to the low voice level.

* = Not Available with Basic Model