User Guide

Installation Instructions Document No. 466-1574.
12
Planning System Access Codes
Use the followin
g
to
p
lan s
y
stem Access Codes. Fill
out Table 7 on
p
a
g
e 12 to use when
p
ro
g
rammin
g
these codes.
Utility Access Code 1
This access code is used durin
g
installation. The de-
fault utilit
y
access code is 4321. This code can be used
for all
p
ro
g
rammin
g
.
Utility Access Code 2
The default access code is 4321. This access code is
used for all
p
ro
g
rammin
g
exce
p
t chan
g
in
g
utilit
y
ac-
cess code 1 and chan
g
in
g
o
p
tions 4, 5, 6, 8, 9, 12, and
13.
Master Access Code
The default Master Access Code is 1234. This user
code is used to: disarm the Control Panel, subdisarm
the Control Panel,
p
ro
g
ram o
p
tions 1 throu
g
h 3, 36,
37, 41 - 43,
p
ro
g
ram li
g
ht control, set the s
y
stem
clock,
p
ro
g
ram the master code,
p
ro
g
ram access
codes 1-5,
p
ro
g
ram the
p
anic code, and
p
erform a sen-
sor or
p
hone test.
Note
: If the installer deletes the master access code, the
owner may enter program mode by pressing cancel.
Access Codes (1 - 5)
The Control Panel can have u
p
to 5 secondar
y
user ac-
cess codes. These could be used b
y
children, a bab
y
sitter, or a service
p
erson. These codes cannot be used
for
p
ro
g
rammin
g
.
Panic Code
The Panic Code is able to disarm or subdisarm the
p
anel and send a silent alarm to the Central Station.
There will be no indication of an alarm at the
p
anel.
Planning System Options
Use the followin
g
to
p
lan s
y
stem O
p
tions. See Table
18 on
p
a
g
e 21 for a com
p
lete listin
g
of all s
y
stem o
p
-
tions and their characteristics. Fill out the last column
of this table to use when
p
ro
g
rammin
g
.
Option 01: Panel Piezo Beeps
Add
turns on
p
anel bee
p
s that sound when an access
code is entered or when the armin
g
level is chan
g
ed.
The armin
g
buttons will cause bee
p
s accordin
g
to the
armin
g
level. See Table 8 on
p
a
g
e 13 for a detailed ex-
p
lanation of
p
anel
p
iezo bee
p
s.
Delete
turns off
p
anel
p
iezo bee
p
s.
Option 02: Panel Voice
Add
enables the
p
anel’s voice.
Delete
disables the
p
anel’s voice.
Note that the
p
anel voice is alwa
y
s on for status mes-
sa
g
es, o
p
en sensor res
p
onses, and when in
p
ro
g
ram
mode.
Table 7 System Access Codes
Type Default
Installer
Settings
Utilit
y
Access Code 1 4321
Utilit
y
Access Code 2 4321
Master Access Code 1234
Access Code 1 None
Access Code 2 None
Access Code 3 None
Access Code 4 None
Access Code 5 None
Panic Code None