Owner manual
GE
Data Sheet
12A Digital PicoDLynx
TM
: Non-Isolated DC-DC Power Modules
3Vdc –14.4Vdc input; 0.45Vdc to 5.5Vdc output; 12A Output Current
November 19, 2013
©2013 General Electric Corporation.
All rights reserved.
Page 2
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings
only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations
sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.
Parameter Device Symbol Min Max Unit
Input Voltage All V
IN
-0.3 15 V
Continuous
SEQ, SYNC, VS+ All 7 V
CLK, DATA, SMBALERT# All 3.6 V
Operating Ambient Temperature All T
A
-40 85 °C
(see Thermal Considerations section)
Storage Temperature All T
stg
-55 125 °C
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
Parameter Device Symbol Min Typ Max Unit
Operating Input Voltage All V
IN
3
⎯
14.4 Vdc
Maximum Input Current All I
IN,max
9 Adc
(V
IN
=3V to 14V, I
O
=I
O, max
)
Input No Load Current
(V
IN
= 12Vdc, I
O
= 0, module enabled)
V
O,set
= 0.6 Vdc I
IN,No load
52 mA
V
O,set
= 5Vdc I
IN,No load
85 mA
Input Stand-by Current
(V
IN
= 12Vdc, module disabled)
All I
IN,stand-by
6.5 mA
Inrush Transient All I
2
t 1 A
2
s
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 1H source impedance; V
IN
=0 to
14V
,
I
O
= I
Omax
; See Test Configurations)
All 400 mAp-p
Input Ripple Rejection (120Hz) All -55 dB