User Guide

Adding new room or zoned networks
2
A zone is a grouping of xtures that all act together
according to parameters that are set.
Select “Automatic” to allow the Daintree EZ
Connect system to select the best wireless channel
(recommended).
Different room or zones can be on the same channel.
Daintree EZ Connect wireless lighting controls
solution allows a group of adjacent xtures to
communicate with each other directly, without the
need for a separate hub, gateway or cloud operating
system. Daintree EZ Connect app can commission
WIT100, WIZ20, WHS20 sensors, WA200 Series room
controllers and WWD2 Series or ZBT-S1AWH wall
controllers and is connected as part of a room
based lighting control system. The system can be
commissioned, put into rooms, groups or zones and
control parameters can be set via the Daintree EZ
Connect app that can be downloaded on the Apple
®
App Store.
3
Add nodes to your room or zone
Nodes are any Daintree Control component that
wirelessly communicate with the Daintree Wireless
Controls system. The nodes can include components
such as sensors integrated into Current lighting
xtures, wall controls or WA200 Series room controllers.
The Daintree EZ Connect app will search for
available nodes and the light xtures will blink
when successfully paired with the app.
The user can choose to add the fixture to the room
or zone.
This process will continue until all the devices within
the communication range are discovered.
Max 30 nodes per room zone, but the system can
accommodate thousands of independent rooms
or zones.
Project Name
Date
Type
Catalog Number
Daintree
®
EZ Connect App
Commissioning Steps
Open application
1
You will be asked to create a username and password
the rst time you open the App.
gecurrent.com/daintree
© 2022 Current Lighting Solutions, LLC. All rights reserved. Information and specifications subject to
change without notice. All values are design or typical values when measured under laboratory conditions.
Page 1 of 2
CTRL028 | (Rev 08/05/22)