Tus neeg siv phau ntawv

49-3000304 Rev 1 5
USING THE DRYER
Getting started
A
DRYING
—
This commercial dryer uses two payment methods:
1) A Commercial Laundry Coin Meter Kit to pay with coins (sold separately). To order, call GE Appliances at
1-866-531-9828 or visit us at GEAppliances.com/commerciallaundry.
Model Description
VKAUNICBT Money Box
VTA56CHKT Coin Meter Assembly
VTA56SCDT Single Coin Drop
2) An App based payment system. Using your smartphone, scan the QR code on the control panel to download the App
and see a quick tutorial on the operation of the dryer, or go to GEAppliances.com/commerciallaundry to
learn more.
B
TEMPERATURE
LOW For delicates, synthetics and items labeled tumble dry low.
MEDIUM For synthetics, blends, delicates and items labeled permanent press.
HIGH For regular to heavy cottons.
NO HEAT For delicate items without heat. Use a TIME dry cycle.
C
TIME
—
Close the dryer door and press any pad to awaken the dryer on the default cycle. Press TIME as
needed to set the desired dry time.
D
START
—
Close the dryer door. Select Start/Pause ( ).
NOTE: Opening the dryer door during operation will stop the dryer. To restart the dryer, close the door and
press the Start/Pause ( ) pad to complete the cycle.
NOTE: The dryer can be paused either by opening its door or pressing the Start/Pause ( ) pad. The dryer will
automatically cancel after 4 minutes if paused with the door closed and without input. The App will notify the user of
the available time remaining to restart the cycle before the session is canceled.
C AA B D
OWNER SETTINGS
To Enter Administrator Mode:
1) The coin box must be disconnected and the service lid connected.
2) Press and hold the TIME and Start/Pause ( ) pads and then release them
after 10 seconds. Upon entering the Administrator Mode, all LEDs will flash.
To Set Cost (Cost Definition Mode):
1) Enter the Administrator Mode - See above section.
2) “CD” will blink in the display. Press the Start/Pause (
) pad to enter Cost
Definition mode.
3) To increase or decrease the cost, press any of the four available cycle pads (HIGH, MEDIUM, LOW or NO HEAT).
4) Press the Start/Pause (
) pad to set the selected cost.
To Set Drying Times (Time Definition Mode):
1) Enter the Administrator Mode - See above section.
2) “CD” will blink in the display. Press the TIME pad to select “TD” and the Start/Pause (
) pad to enter into the
Time Definition mode.
3) To increase or decrease the time, press any of the four available cycle pads (HIGH, MEDIUM, LOW or NO HEAT).
4) Press the Start/Pause ( ) pad to set the selected times.
Disconnect
Coin Box
Connect
Service Lid
IMPORTANT:
Clean the lint filter
each time you use
the dryer.