Specifications
Café
™
30" Built-In French-Door
Single Convection Wall Oven
CTS90FP4MW2 / CTS90FP3MD1 / CTS90FP2MS1
© 2019 GE Appliances PC92772 06/19
For answers to your Café™ product questions, visit our website at cafeappliances.com.
ADDITIONAL ACCESSORIES
CXWSFHKPMBZ
Brushed Bronze
2 handles, 2 knobs
(standard on Matte White)
CXWSFHKPMSS
Brushed Stainless
2 handles, 2 knobs
(standard on Matte Black)
CXWSFHKPMBT
Brushed Black
2 handles, 2 knobs
CXWSFHKPMCU
Brushed Copper
2 handles, 2 knobs
INSTALLATION ABOVE A COOKTOP
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
INSTALLATION ABOVE A WALL OVEN
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
If both ovens ar e French Door models, then 30” min.
If the second oven is a dr op down door model, then 14” min.
9 1/2”
5
1/4”
Junction box
location (may also
be located in
adjacent cabinet.)
X
Y
Countertop
If Y = 0.0” then X = 0.0”
O
therwise,
X
= Y + 1.0” (2.5 cm) Min.
Ca binet Door
INSTALLATION TO ADJACENT COUNTERTOP
AND CABINET DOORS
14” Min.
O
ven Door Side
C
learance
(
Both Sides)
16” Min.
O
ven Door
Fr
ont
C
learance
ELEC. ELEC.
TOP VIEW
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
If both ovens ar e French Door models, then 30” min.
If the second oven is a dr op down door model, then 14” min.
9 1/2”
5
1/4”
Junction box
location (may also
be located in
adjacent cabinet.)
X
Y
Countertop
If Y = 0.0” then X = 0.0”
O
therwise,
X
= Y + 1.0” (2.5 cm) Min.
Ca binet Door
INSTALLATION TO ADJACENT COUNTERTOP
AND CABINET DOORS
14” Min.
O
ven Door Side
C
learance
(
Both Sides)
16” Min.
O
ven Door
F
ront
C
learance
ELEC. ELEC.
TOP VIEW
SIDE BY SIDE INSTALLATION
FRONT VIEW OF CUTOUTS
INSTALLATION TO ADJACENT
COUNTERTOP AND CABINET DOORS
DIMENSIONS AND INSTALLATION
Note: This model is not approved for installation below a
countertop or in combination with a separate cooktop. The
minimum installation height from the floor is 16-1/4".
Note: A minimum gap of 14" from either side of the wall oven
to an adjacent 45 or 90 cabinet, drawer or was is required to
avoid interference with the opening of the doors. The handles
protrude 2-1/2" from the door face.
Note: Countertops may need to be notched on either
side of the wall oven to avoid interference with the
opening of the doors.
Installation information: Before installing, consult installation
instructions packed with products for current dimensional data
and for alternate installation options.
THIS MODEL IS NOT APPROVED FOR FLUSHMOUNT
INSTALLATION