Specifications
Café
™
30" Built-In Double
Convection Wall Oven
CTD90FP4MW2 / CTD90FP3MD1 / CTD90FP2MS1
© 2019 GE Appliances PC92772 06/19
For answers to your Café™ product questions, visit our website at cafeappliances.com.
WARRANTY
Parts warranty Limited 1-year entire appliance
Labor warranty Limited 1-year entire appliance
Warranty notes See written warranty for full details
DIMENSIONS AND INSTALLATION
INFORMATION
Note: These ovens are not approved for stackable
installations. Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Door handle protrudes 2-1/2" from door face. Cabinets and
drawers on adjacent 45° and 90° walls should be placed to
avoid interference with the handle.
Electric wall ovens are not approved for installation
with a plug and receptacle. They must be hard wired in
accordance with installation instructions.
Installation Information:
Before installing, consult installation instructions packed
with product for current dimensional data and for alternate
installation options.
Note: A minimum gap of 14" from either side of the wall
oven to an adjacent 45 or 90 cabinet, drawer or was is
required to avoid interference with the opening of the
doors. The handles protrude 2-1/2" from the door face.
installation above a wall oven
Cabinet 30"
A – Overlap of oven at top of cutout 1 1/4"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F –Overall width 29-3/4"
F
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and flush
with sides of cutout
or solid bottom floor
Suitable
bracing
to support
runners
(must support 375 lbs.)
22" minimum
door opening
allowance
21"
D
E
Conduit
48-1/2"
Cutout depth
23-1/2"
9-1/2"
MAX
47" to
bottom of
junction box
Junction box
location
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
Cabinet 30"
A – Overlap of oven at top of cutout 1 1/4"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F –Overall width 29-3/4"
F
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and flush
with sides of cutout
or solid bottom floor
Suitable
bracing
to support
runners
(must support 375 lbs.)
22" minimum
door opening
allowance
21"
D
E
Conduit
48-1/2"
Cutout depth
23-1/2"
9-1/2"
MAX
47" to
bottom of
junction box
Junction box
location
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
Cabinet 30"
A – Overlap of oven at top of cutout 1 1/4"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F –Overall width 29-3/4"
F
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and flush
with sides of cutout
or solid bottom floor
Suitable
bracing
to support
runners
(must support 375 lbs.)
22" minimum
door opening
allowance
21"
D
E
Conduit
48-1/2"
Cutout depth
23-1/2"
9-1/2"
MAX
47" to
bottom of
junction box
Junction box
location
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
Cabinet 30"
A – Overlap of oven at top of cutout 1 1/4"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2"
E – Overall height with trim 53"
F –Overall width 29-3/4"
F
C
L
2 x 4 or
equivalent runners
level with bottom of
cutout and flush
with sides of cutout
or solid bottom floor
Suitable
bracing
to support
runners
(must support 375 lbs.)
22" minimum
door opening
allowance
21"
D
E
Conduit
48-1/2"
Cutout depth
23-1/2"
9-1/2"
MAX
47" to
bottom of
junction box
Junction box
location
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
Cutout height
50-1/4" MIN.
without pedestal
51-13/16" MIN.
51-15/16" MAX.
with pedestal
Recommended
minimum
cutout location
from the floor
12"
30''
2-1/2" MIN
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
INSTALLATION ABOVE A WALL OVEN
ADDITIONAL ACCESSORIES
CXWDFHKPMBZ
Brushed Bronze
3 handles, 4 knobs
(standard on Matte White)
CXWDFHKPMSS
Brushed Stainless
3 handles, 4 knobs
(standard on Matte Black)
CXWDFHKPMBT
Brushed Black
3 handles, 4 knobs
CXWDFHKPMCU
Brushed Copper
3 handles, 4 knobs