Manualshelf

Specification

ManualsBrandsGE Cafe ManualsAppliances6.4 cu. ft. Gas Range with Self-Cleaning Convection Oven in Stainless Steel
12
CGS985SETSS
GE Café
™
Series 30" Slide-In Front Control
Range with Baking Drawer
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Specification Revised 2/16
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
ELECTRICAL REQUIREMENTS: 120v; 60Hz, 15A
INSTALL ATION INFORMATION: Before installing,
consult installation instructions packed with product for
current dimensional data.
CGS985
36 1/4" +/- 1/4"
27"
w/o handle
29 3/4"
w/handle
*48"
1 1/2"
30"
*Dimensions are referenced from the point at the
back of the range that will contact the rear wall first.
*Dimension are referenced from the point at
the back of the range that will contact the rear
wall first. Max dimension should be considered
between the upper and lower doors.
**Height to backguard based on Café style
backguard kit installed.
Gas Pipe and Electrical Outlet Locations
Recommended area 120V
outlet on rear wall and area for
through-the-wall connection
of pipe stub and shut-off valve.
Recommended area
for through-the-floor
connection of pipe stub
and shut-off valve.
To prevent drafts from affecting burner
operation, seal all openings in floor and wall.
CAUTION
30"
4"
5"
9"
8"
2"
3"
14 1/2"
4 1/2"
Minimum to
cabinets on
either side
of the range.
Minimum
clearance
to left wall
Minimum
Minimum
clearance to
right wall
Maximum
depth for
cabinets above
countertops
Front edge of
the range side
panel forward
from cabinet
To cabinets below cooktop
and at the range back
(Some models will not have
0" clearance.)
To cabinets
below
cooktop and
at the range
back
18"
6"
30"
30"
13"
6"
36"
0"
0"
1/4"
CGS985
36 1/4" +/- 1/4"
27"
w/o handle
29 3/4"
w/handle
*48"
1 1/2"
30"
*Dimensions are referenced from the point at the
back of the range that will contact the rear wall first.
*Dimension are referenced from the point at
the back of the range that will contact the rear
wall first. Max dimension should be considered
between the upper and lower doors.
**Height to backguard based on Café style
backguard kit installed.
Gas Pipe and Electrical Outlet Locations
Recommended area 120V
outlet on rear wall and area for
through-the-wall connection
of pipe stub and shut-off valve.
Recommended area
for through-the-floor
connection of pipe stub
and shut-off valve.
To prevent drafts from affecting burner
operation, seal all openings in floor and wall.
CAUTION
30"
4"
5"
9"
8"
2"
3"
14 1/2"
4 1/2"
Minimum to
cabinets on
either side
of the range.
Minimum
clearance
to left wall
Minimum
Minimum
clearance to
right wall
Maximum
depth for
cabinets above
countertops
Front edge of
the range side
panel forward
from cabinet
To cabinets below cooktop
and at the range back
(Some models will not have
0" clearance.)
To cabinets
below
cooktop and
at the range
back
18"
6"
30"
30"
13"
6"
36"
0"
0"
1/4"
CGS985
36 1/4" +/- 1/4"
27"
w/o handle
29 3/4"
w/handle
*48"
1 1/2"
30"
*Dimensions are referenced from the point at the
back of the range that will contact the rear wall first.
*Dimension are referenced from the point at
the back of the range that will contact the rear
wall first. Max dimension should be considered
between the upper and lower doors.
**Height to backguard based on Café style
backguard kit installed.
Gas Pipe and Electrical Outlet Locations
Recommended area 120V
outlet on rear wall and area for
through-the-wall connection
of pipe stub and shut-off valve.
Recommended area
for through-the-floor
connection of pipe stub
and shut-off valve.
To prevent drafts from affecting burner
operation, seal all openings in floor and wall.
CAUTION
30"
4"
5"
9"
8"
2"
3"
14 1/2"
4 1/2"
Minimum to
cabinets on
either side
of the range.
Minimum
clearance
to left wall
Minimum
Minimum
clearance to
right wall
Maximum
depth for
cabinets above
countertops
Front edge of
the range side
panel forward
from cabinet
To cabinets below cooktop
and at the range back
(Some models will not have
0" clearance.)
To cabinets
below
cooktop and
at the range
back
18"
6"
30"
30"
13"
6"
36"
0"
0"
1/4"
CGS985
36 1/4" +/- 1/4"
27"
w/o handle
29 3/4"
w/handle
*48"
1 1/2"
30"
*Dimensions are referenced from the point at the
back of the range that will contact the rear wall first.
*Dimension are referenced from the point at
the back of the range that will contact the rear
wall first. Max dimension should be considered
between the upper and lower doors.
**Height to backguard based on Café style
backguard kit installed.
Gas Pipe and Electrical Outlet Locations
Recommended area 120V
outlet on rear wall and area for
through-the-wall connection
of pipe stub and shut-off valve.
Recommended area
for through-the-floor
connection of pipe stub
and shut-off valve.
To prevent drafts from affecting burner
operation, seal all openings in floor and wall.
CAUTION
30"
4"
5"
9"
8"
2"
3"
14 1/2"
4 1/2"
Minimum to
cabinets on
either side
of the range.
Minimum
clearance
to left wall
Minimum
Minimum
clearance to
right wall
Maximum
depth for
cabinets above
countertops
Front edge of
the range side
panel forward
from cabinet
To cabinets below cooktop
and at the range back
(Some models will not have
0" clearance.)
To cabinets
below
cooktop and
at the range
back
18"
6"
30"
30"
13"
6"
36"
0"
0"
1/4"

Summary of content (2 pages)