Owners manual
49-80788-1 17
Oven Doors (Cont.)
CARE AND CLEANING:2YHQ'RRUV
Lower Oven Door Removal (Recommended)
NOTE:'RRUUHPRYDOLVQRWDUHTXLUHPHQWIRULQVWDOODWLRQRIWKHSURGXFWEXWLVDQDGGHGFRQYHQLHQFH
To remove the door:
1.  Open the oven door as far as it will go.
2.  Remove hinge bracket from front frame and set 
aside. The hinge bracket must be replaced for proper 
door functionality when door is reinstalled.
3.  Push both hinge locks down toward the door frame to 
the unlocked position. This may require a flat-blade 
screwdriver. DO NOT LIFT THE DOOR BY THE 
HANDLE!
4.  Place hands on both sides of the door and close the 
oven door to the removal position (approximately 
1”–2” [2.5 cm–5.1 cm] from the closed position).
 /LIWWKHGRRUXSDQGRXWXQWLOWKHKLQJHDUPVFOHDUWKH
slots. NOTE:7KHRYHQGRRULVYHU\KHDY\%HVXUH
you have a firm grip before lifting the oven door off 
WKHKLQJHV8VHFDXWLRQRQFHWKHGRRULVUHPRYHG
'RQRWOD\WKHGRRURQLWVKDQGOH7KLVFRXOGFDXVH
dents or scratches.
Replacing the Lower Oven Door
NOTE:7KHRYHQGRRULVKHDY\<RXPD\QHHGKHOSOLIWLQJWKHGRRUKLJKHQRXJKWRVOLGHLWLQWRWKHKLQJHVORWV'R
not lift the door by the handle.
 /LIWWKHRYHQGRRUE\JUDVSLQJHDFKVLGH
2.  With the door at the same angle as the removal 
position (approximately 1”–2” [2.5 cm–5.1 cm] from 
the closed position), seat the notch of the hinge arm 
into the bottom edge of the hinge slot. The notch of 
the hinge arm must be fully seated into the bottom of 
the slot.
 )XOO\RSHQWKHGRRU,IWKHGRRUZLOOQRWIXOO\RSHQWKH
indentation is not seated correctly in the bottom edge 
of the slot.
4.   Push the hinge locks up against the front frame of the 
oven cavity, to the locked position.
5.  Replace hinge bracket. The hinge bracket must be 
replaced for proper door functionality.
6.  Close the oven door.
Hinge Slot
Hinge Arm
+LQJH8QORFNHG3RVLWLRQ
Hinge Clears Slot
+LQJH%UDFNHW
Hinge in 
/RFNHG
Position
1RWFKRI+LQJH
Securely Fitted 
,QWR%RWWRPRI
Hinge Slot
%RWWRP
Edge of 
Slot
Hinge 
Arm
+LQJH1RWFK
+LQJH%UDFNHW










