Quick Specs

Listed by
Underwriters
Laboratories
PVB94DT
GE Profile
™
Series 30" Telescopic Downdraft System
Specification Revised 10/15
For answers to your Monogram, GE Profile
™
Series
or GE
®
Series appliance questions, visit our website
at geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Venting OptiOns (in inches)
thrOugh the FlOOr
in cabinet Discharge
(DOwn)
in cabinet Discharge
(right)
in cabinet Discharge
(leFt)
nOte: Telescopic downdraft vents are not recommended
to be installed with cooktops that are flush mounted.
Approved for use with the following GE Profile
™
and GE
®
Series cooktops–30" electric models, 30" gas sealed
burner models and 30" induction models.
nOt apprOVeD FOr use with stanDarD
burner gas cOOktOps.
nOte: The cooktop must be at least 26" deep with
a flat surface area of 23-1/2" or more, front to back.
In addition, other clearances to the front edge of the
countertop must be considered.
nOte: Dimensions shown are for reference only.
Before cutting out countertop, refer to instructions
packed with downdraft and cooktop.
nOte: Installation on cabinets/countertops against
the wall will not be possible in most applications.
Against the wall installations are limited to dimension
requirements. Refer to installation instructions packed
with product for further details.
JXrb67 inDOOr remOte accessOry. Optional
accessory may be ordered for installation of motor and
blower assembly in an indoor remote location.
DimensiOns anD installatiOn inFOrmatiOn (in inches)