Quick Specs

JVB67ABB - GE Profile
™
36" Telescopic Downdraft System
TM
Specification Revised 4/00
2-1/4
6-3/8
3-1/4
33-7/8
36
17-1/8
20-5/8
12-1/8
7-1/4
7-1/2
8-1/2
27
C
L
Overall Dimensions (in inches) Venting Options (in inches)
Installation Information: Before installing, consult
installation instructions packed with product for current
dimensional data.
For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile
™
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
Through the Floor
In Cabinet Discharge (Down)
In Cabinet Discharge (Right)
In Cabinet Discharge (Left)
Note: Telescopic downdraft vents are not recommended to be
installed with cooktops that are flush mounted.
Approved for use with the following GE Profile Performance
™
, GE
Profile
™
, and GE cooktops–36” and 30” electric models, 36” and 30”
gas sealed burner models and 36” and 30”
induction models.
Not Approved for use with standard burner gas cooktops.
Note: The cooktop mujst be at least 26” deep with a flat
surface area of 23-1/2” or more, front to back. In addition,
other clearances to the front edge of the countertop must
be considered.
Note: Dimensions shown are for reference only. Before
cutting out countertop, refer to instructions packed with down-
draft and cooktop.
Note: Installation on cabinets/countertops against the
wall will not be possible in most applications. Against
the wall installations are limited to dimension
requirements. Refer to installation instructions packed
with product for further details
JXBC57 Outdoor Cover. Optional accessory may be ordered for
installation of motor and blower assembly on outside wall.
JXRB57 Indoor Remote Accessory. Optional accessory may be
ordered for installation of motor and blower assembly in an indoor
remote location.