Owner's Manual
24 49-80838
TROUBLESHOOTING TIPS
Troubleshooting Tips ... Before you call for service
Problem Possible Cause What To Do
“Crackling” or 
“popping” sound
This is the sound of the metal heating and 
cooling during both the cooking and cleaning 
functions.
This is normal. 
Why is my range 
making a "clicking" 
noise when using my 
oven?
Your range cycles the heating elements by 
turning relays on and off to maintain the oven 
temperature.
This is normal.
Clock and timer do not 
work
A fuse in your home may be blown or the 
circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
Plug on range is not completely inserted in the 
electrical outlet.
Make sure electrical plug is plugged into a live, 
properly grounded outlet.
Oven controls improperly set. 6HHWKH8VLQJWKHNLWFKHQWLPHUVHFWLRQ
Storage drawer won’t 
close
Power cord may be obstructing drawer in the 
lower back of the range.
Reposition the drawer and power cord. See the 
6WRUDJH'UDZHU5HPRYDOLQVWUXFWLRQVLQWKH&DUH
and cleaning of the range section.
Rear drawer support is on top of the guide rail. 5HSRVLWLRQWKHGUDZHU6HHWKH6WRUDJH'UDZHU
Removal instructions in the Care and cleaning of 
the range section.
Oven door is crooked The door is out of position. Because the oven door is removable, it sometimes 
gets out of position during installation. To 
straighten the door, push down on the high corner.
Oven light does not 
work
Light bulb is loose or defective. Tighten or replace bulb.
Pad operating light is broken. Call for service.
Oven will not self-clean The temperature is too high to set a self-clean 
operation.
Allow the oven to cool and reset the controls.
Oven controls improperly set. See the Cleaning the Oven section.
Excessive smoking 
during clean cycle
Excessive soil or grease. Press the Cancel/Off pad. Open the windows to 
rid the room of smoke. Wait until the LOCKED 
light goes off. Wipe up the excess soil and reset 
the clean cycle.
Excessive smoking 
during broiling
Food too close to burner element. Lower the rack position of the food.
Oven door will not 
open after a clean cycle
Oven too hot. Allow the oven to cool below locking temperature.
Oven not clean after a 
clean cycle
Oven controls improperly set. See the Cleaning the Oven section.
Oven was heavily soiled. Clean up heavy spillovers before starting the clean 
cycle. Heavily soiled ovens may need to self-clean 
again or for a longer period of time.
"LOCK DOOR" flashes 
in the display
The self-clean cycle has been selected but the 
door is not closed.
Close the oven door.
DOOR LOCK light is on 
when you want to cook
The oven door is locked because the 
temperature inside the oven has not dropped 
below the locking temperature.
Press the Cancel/Off pad. Allow the oven to cool.
“F— and a number 
or letter” flash in the 
display
You have a function error code. Press the Cancel/Off pad. Allow the oven to cool 
for one hour. Put the oven back into operation.
If the function code repeats. 'LVFRQQHFWDOOSRZHUWRWKHRYHQIRUDWOHDVW
seconds and then reconnect power. If the function 
error code repeats, call for service.










