Manualshelf

Owners manual

ManualsBrandsGE Appliances ManualsAppliance AccessoriesIM4D Icemaker
11121314151617181920
11
Installation Instructions
9
11 12
INSTALL THE ICE BUCKET
Place the ice bucket (8) under the icemaker.
10
8
ATTACH WARRANTY LABEL
A label (7) is provided with this kit to record the date of
installation for warranty purposes. Apply it to the back
of the refrigerator.
11
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner’s Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section on page 14.
12
D
MOUNT THE ICEMAKER
• Lift the icemaker so the fill tube assembly (11 or 12
depending on model) fits in the fill cup opening (D).
Hang the icemaker on the two mounting screws (B).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube assembly (11 or 12 depending on
PRGHOH[WHQGVLQWRWKHILOOFXSRSHQLQJDWWKHEDFN
of the icemaker. (Check the rear of the refrigerator
to make sure the fill tube has not been pushed out
of the back of the refrigerator).
• The icemaker mounting screws are located in the
uppermost position of the mounting slots on the
icemaker bracket.
• The icemaker is level.
• The icemaker power switch is in the OFF position.
SECURELY TIGHTEN THE ICEMAKER MOUNTING
SCREWS.
B