Instruction Manual

Specification Revised 5/22
GFV55ESSN
GE
®
Long Vent 7.8 cu. ft. Capacity Front Load Electric Dryer
For answers to your Monogram, GE Café
™
,
GE Profile
™
or GE Appliances product questions,
visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000.
54-1/2
"
SPECIAL INSTALLATION REQUIREMENTS:
STACKED INSTALLATION:
Brackets for stacking dryer over washer are not included with
the dryer. Order part no. GFA28KITN.
ALCOVE OR CLOSET INSTALLATION:
If your dryer is approved for installation in an alcove or closet, it
will be label on the dryer back.
The dryer MUST be exhausted to the outside.
Minimum clearances between dryer cabinet and adjacent walls or
other surfaces are: 0" all sides and top.*
Closet doors must be louvered or otherwise ventilated and must
contain a minimum of 60 sq. in. of open area equally distributed.
If this closet contains both a washer and a dryer, doors must contain
a minimum of 120 sq. in. of open area equally distributed.
No other fuel-burning appliance shall be installed in the same closet
with a gas dryer.
BATHROOM OR BEDROOM INSTALLATION:
The dryer MUST be exhausted to the outdoors.
The installation must conform with the local codes, or in the absence
of local codes, with the National Electric Code and National Fuel
Gas Code, ANSI Z223 for gas dryers.
MINIMUM CLEARANCE OTHER THAN ALCOVE OR CLOSET
INSTALLATIONS:
Minimum clearances to combustible surfaces 0" both sides, 0" rear.
FOR MORE INFORMATION ON VENTING KITS AND ACCESSORIES,
PLEASE CALL 1-800-GE-CARES.
STACKED DIMENSIONS
(IN INCHES)
28"
16"
28-7/8"
PEDESTAL DIMENSIONS
(IN INCHES)
GFP1528SNWW - WHITE
This optional 16" pedestal raises
the door opening and height of the
washer or dryer.
79-1/2
Listed by
Underwriters
Laboratories
R
*For improved performance, a 1/2" clearance is suggested on each side.
RISER DIMENSIONS
(IN INCHES)
GFR0728SNWW - WHITE
This optional 7" riser raises the door
opening and height of the washer or
dryer while remaining ADA compliant.
7"
28"
28 7/16"