GE Zoneline Package AZ95 Brochure

Preliminary specifications are subject to change
GE APPLIANCES VERTICAL ZONELINE HEAT PUMPS ADDITIONAL
SPECIFICATIONS
ZONELINE SINGLE PACKAGED VERTICAL UNIT NOMENCLATURE
Heat pump unit shall automatically switch from heat
pump operation to electric resistance heat when it
is unable to provide sufficient heat to maintain room
temperature or when the outdoor temperature is
25
o
F or less.
In the event of a compressor failure during heat pump
operation, the unit shall automatically switch to electric
resistance heat to maintain selected room temperature
regardless of outdoor temperatures.
Unit shall have an indoor coil temperature sensor to
protect the compressor when the outdoor temperatures
are too high for heat pump operation.
ADDITIONAL SPECIFICATIONS SERVICE
Submit complete information with bid covering service
availability, to whom service on units will be assigned,
complete address and phone number, including phone
number of emergency service personnel.
STARTUP, ADJUST, DEMONSTRATE
Contractor shall be responsible for the initial starting
of units, adjustments thereto, cleaning, etc., to place the
units in required operating condition. Contractor shall
demonstrate to the owner, or his representative, the
operation of units for both summer and winter functions.
AZ95H12DAC
Chassis series
95=heat pump single
packaged vertical unit
Zoneline
Unit type
H= heat pump with electric
resistance heat
E=cooling with electric
resistance heat
Nominal cooling capacity
09=9,000 BTUh cooling
12=12,000 BTUh cooling
18=18,000 BTUh cooling
Special features
C=Corrosion treated
Voltage/Phase/Frequency
D= 230/208 Volt, single
phase, 60 Hz
E= 265 Volt, single phase,
60 Hz
Universal power
connection
The Vertical Zoneline chassis is identified by a model number defining the type of unit, cooling capacity, electrical
information and optional features included on the unit. When specifying or ordering the Zoneline chassis, use of this
nomenclature will ensure receiving the correct unit.
20