Architect and Engineering Manual

REMOTE THERMOSTATS

RAK180W1

ENERGY MANAGEMENT OCCUPANCY-SENSING

WIRED/WIRELESS THERMOSTAT

• 2-wire power connection available

(all other signals wireless)

• Thermostat (shown) & control card (mounts on top

of unit) included

• Control card works oﬀ 24 Volt AC signal from unit

• Works with single-stage cooling and single-stage or

two-stage heating systems with proper setup.

Default is two-stage heating and B-type heat pump

• Extra 24V output may be programmed to control

other room systems such as lighting, vents, etc.

RAK149F2

HEAT PUMP DIGITAL

TWO-FAN-SPEED THERMOSTAT

• Two fan speeds

• 24V AC digital remote wall thermostat

• Requires 6-wire (resistance heat) or 7-wire

(heat pump) hookup

• Works with single-stage cooling and single-stage

or two-stage heating systems

RAK149P2

HEAT PUMP DIGITAL PROGRAMMABLE

REMOTE THERMOSTAT

• 24V AC digital remote wall thermostat

• Programmable for 7-day or 5+2-day programs

• Requires 5-wire (resistance heat) or 6-wire

(heat pump) hookup

• Works with single-stage cooling and

single-stage or two-stage heating systems

All Zoneline® Vertical units are compatible with GE Appliances’

wall-mounted remote thermostats.

Specifications subject to change without notice.