HIGHLY EFFICIENT. AMAZINGLY QUIET.
WHY GE ZONELINE TERMINAL AIR CONDITIONERS? ® Engineered for year-round comfort. Easy to operate. Whisper quiet. GE Zoneline units stand out as the premium choice for virtually any application – even in extreme conditions. As one of the most energy-efficient packaged terminal air conditioners in the industry, Zoneline keeps costs low and profits high.
LOW ENERGY COSTS. ONGOING SAVINGS. Zonelines are some of the most energy efficient PTAC/PTHP in the industry. The more energy efficient the unit, the lower the utility bill – and that means a better bottom line for you. PEACE AND QUIET Cross-flow blower and two fan motors create less noise to ensure all-around comfort – without all the commotion.
KEY FEATURES ELECTRONIC TOUCH CONTROLS Microcomputer-touch controls with a touch pad and LED readout give the user better control over the temperature. ELECTRONIC TEMPERATURE LIMITING Heating and cooling temperature can be limited to prevent expensive over-cooling or over-heating. Heating and cooling limits are also automatically set so seasonal adjustment is not necessary.
RESISTANCE HEAT LINE UP DELUXE 4100 SERIES* AZ41E15DAB 14,300/14,000 BTU, 10.3/10.3 EER, 230/208 Volts AZ41E12DAB 11,800/11,500 BTU, 11.1/11.1 EER, 230/208 Volts AZ41E09DAB 9,700/9,600 BTU, 12.0/12.0 EER, 230/208 Volts AZ41E15EAB 14,300 BTU, 10.3 EER, 265 Volts AZ41E12EAB 11,800 BTU, 11.1 EER, 265 Volts AZ41E09EAB 9,700 BTU, 12.0 EER, 265 Volts AZ41E07EAB 7,200 BTU, 12.3 EER, 265 Volts AZ41E07DAB 7,200/6,900 BTU, 12.3/12.3 EER, 230/208 Volts DELUXE DRY AIR 25 AZ41E12DAP 11,200/11,000 BTU, 10.8/10.
HEAT PUMP LINE UP DELUXE 6100 SERIES** AZ61H15DAB 14,500/14,200 cooling BTU, 13,500/13,400 heating BTU, 10.6/10.6 EER, 230/208 Volts AZ61H15EAB 14,400 cooling BTU, 13,500 heating BTU, 10.6 EER, 265 Volts AZ61H12DAB 11,700/11,600 cooling BTU, 10,600/10,400 heating BTU, 11.6/11.6 EER, 230/208 Volts AZ61H12EAB 11,700 cooling BTU, 10,700 heating BTU, 11.6 EER, 265 Volts AZ61H09DAB 9,400/9,100 cooling BTU, 8,300/8,100 heating BTU, 12.2/12.
ZONELINE® PTAC CHART 4100 SERIES UNITS DELUXE SERIES – COOLING & ELECTRIC HEAT 230/208V MODELS Cooling BTUH EER (BTU/Watt) Dehumidification Pts/Hr Refrigerant type CFM, indoor fan high CFM, indoor fan low Vent CFM (full open/partial open) Power factor Sensible heat ratio @ 230 volts Watts Cooling Amperes, F.L. Amperes, L.R.
DRY AIR 25 AZ41E07DAP 6,500/6,300 11.7/11.7 2.3 R-410A 220 190 50/40 86%/87% 60% 555/535 2.8/3.0 19.0 97.0/110.0 AZ41E09DAP 9,200/8,800 11.5/11.5 3.4 R-410A 280 208 70/45 92% 60% 790/765 3.6/3.9 21.0 105.2/118.2 AZ41E12DAP 11,200/11,000 10.8/10.8 4.4 R-410A 330 270 75/45 92% 60% 1035/1015 4.7/5.1 29.5 105.4/118.4 AZ41E07EAP 6,500 11.7 2.3 220 190 50/40 87% 60% 555 2.4 12.0 97.4/110.5 AZ41E09EAP 9,200 11.5 3.4 280 208 70/45 91% 75% 795 3.2 16.5 104.9/117.9 AZ41E12EAP 11,200 10.8 4.
ZONELINE® PTAC CHART 6100 SERIES UNITS DELUXE SERIES – HEAT PUMP UNITS* 230/208V MODELS Cooling BTUH EER (BTU/Watt) Dehumidification Pts/Hr Refrigerant type CFM, indoor fan high CFM, indoor fan low Vent CFM (full open/partial open) Power factor Sensible heat ratio @ 230 volts Cooling Watts Cooling Amperes, F.L. Amperes, L.R. Reverse cycle heat BTUH COP Heating Watts Heating Amperes Weight (Net/Ship) AZ61H07D 7,100/6,900 13.0/13.0 1.7 R-410A 340 194 50/40 91% 85% 545/525 2.6/2.8 19.0 6,200/6,100 3.9/3.
ZONELINE® DETAILS NOMENCLATURE The Zoneline chassis is identified by a model number defining the type of unit, cooling capacity, electrical information and optional features included on the unit. When specifying or ordering the Zoneline chassis, use of this nomenclature will assure receiving the correct unit.
WARRANTY For the period of GE will replace One year From the date of the original purchase Any part of the air conditioner which fails due to a defect in materials or workmanship. During this limited one-year warranty, GE will provide, free of charge, all labor and related service costs to replace the defective part.
ZONELINE® MUST-HAVES Wall sleeve (optional) RAB71A (Shown) RAB77A4 (SMC) (Not shown) WALL SLEEVE Heavy-gauge galvanized steel with a baked enamel finish for outstanding protection and appearance. Cross-flow blower RAB71A wall sleeve Heavy-gauge galvanized steel, with insulation. A—42", B—13-3/4", C—16" RAB77A4 wall sleeve (shown below) Molded SMC fiberglass-reinforced polyester compound. A—42-1/8", B—13-7/8", C—16-1/4" Wall opening dimensions Add 1/4" to A and C dimensions for all cutout sizes.
RECEPTACLES/SUB-BASES SUB-BASE Tandem 230/208V 15 Amp NEMA6-15R Perpendicular 230/208V 20 Amp NEMA6-20R Large tandem 230/208V 30 Amp NEMA6-30R MODEL RAK204U RAK204D15P RAK204D20P RAK204D30P RAK204E15 RAK204E20 RAK204E30 VOLTAGE N/A 230/208 230/208 230/208 265 265 265 AMPS N/A 15 20 30 15 20 30 RECEPTACLE N/A NEMA6-20R NEMA6-20R NEMA6-30R NEMA7-15R NEMA7-20R NEMA7-30R 230/208 Volt sub-bases include appropriate power cord kit. 265 Volt units are to be direct connected.
GE APPLIANCES GE’s commitment to appliances has never been stronger. Backed by an investment of more than $1 billion, that legacy continues. We’re streamlining our manufacturing. Conducting more consumer research. Launching new product innovations. Creating more U.S. jobs. Advertising on a national scale. And delivering the support our partners need to succeed well into the future. The opportunity for growth has never been so promising. We’re not just imagining. We’re doing.
