Manual

Troubleshooting tips.
Savetime and money!
Possible Causes What To Do
Heater does notstart The heater is unplugged. • Hake surethe heater plug is pushed completelg
into the outlet.
The fuse is blown/circuit • Check the housefuse/circuit breaker box and replace
breaker is tripped, the fuse or reset the breakeE
Power failure. • If a power failure occurs, turn the heater off.
When power is restored, restart the heater.
The current interrupter • Allow the heater to cool, pressthe RESETbutton located
device is tripped, on the power cord plug and restart the heater`
• If the RESETbutton will not stag engaged, discontinue
use of the heater and contact a qualified servicetechnician.
Heater stopped running Power interruption or • When the power is restored,restart the heater`
power failure occurred.
Heater knocked or tipped over. • Seethe Tip-OverSwitch (onsome models)section.
The current interrupter • Allow the heater to cool, pressthe RESETbutton located
device is tripped, on the power cord plug and restart the heater`
• If the RESETbutton will not stag engaged, discontinue
use of the heater and contact a qualified servicetechnician.
Heater does not heat Airflow isrestricted. • Hake surethere are no curtains, blinds or furniture
as it should blocking the inlet or outlet of the heater. Hake sure
there is at least 3 feet (0.9m) of space on all sidesof
the unit.
The temp control mag not • In LOheat or HI heat mode, pressthe Increase pad.
be set correctlg.
The room mag have been cold. • When the heater isfirst turned on, gou needto allow
time for the room to warm up.
The remote control The batteries are inserted • Check the position of the batteries.Theg should be
(onsome models) is incorrectlg, inserted in the opposite (+)and (-) direction.
not working The batteries meg be dead. • Replacethe batteries.
TIMERfeature not A power outage or interruption • If the Timer was set before the power outage, it will
working properly occurred, need to be reset after power is restored.
6