User Manual

7
• Do not use the product in proximity to high-voltage communications towers, in order to prevent
interference with remote controller signals.
• Be careful when using the product at altitudes of 4000m, or as performance is greatly reduced and
aircraft could be dangerous to operate.
• Please only use the product in legally permitted areas.
2. Operating Instructions
• Do not call or answer the phone while product is in flight. Pay close attention to the GDU Mini
App interface to ensure a safe flight.
• After receiving a low power alert signal, please return and land as soon as possible.
• The aircraft will be forced to return upon receiving an emergency low power alert. Please
control the aircraft to allow it to land into a safe place.
• After landing, first turn off the aircraft’s power supply, then conduct any other operations.
• Do not stop the motor in mid-flight except in case of emergency, in order to prevent any
injuries caused by the falling aircraft.
• The propellers are dangerous when rotating at high speed. Please keep a safe distance from the
aircraft in order to ensure your safety.
3. Maintenance
• Please replace the battery promptly in the case the battery exhibits damage, bulging or leakage.
• If the motors produce abnormal sounds, this may be caused by bearing wear. Please replace
the motor by contacting Customer Support.
• Promptly replace any deformed or damaged propeller blades.
• Keep the gimnal camera lens clean. Only use the special cleaning kit to wipe it.
Product Overview
Aircraft and Remote controller Preparation
1. Remove the cover from the aircraft.