User Manual

Take-off:

①

Press the AUTO Take-off button on the remote controller 3s, the aircraft will hover at

1.5 meters above the ground.

Or ② Unlock the aircraft by pushing the sticks down inward ，the motor running,

push the throttle up.

Landing:

①

Press the RTH button on the remote controller.

②

Push the throttle down until the aircraft lands onto the ground and the motor stops

running.

Automatic Take-off/Landing

The aircraft must fly within 80m of the controller if being piloted using the GDU Mini APP.

Operating steps:

1. Power on the aircraft, and connect the mobile phone to aircraft. WIFI: GDU-02-A-xxx;

password: 12345678.

2. Run GDU Mini APP. Click “Start” to enter the flight interface.

3. Conduct pre-flight check according to the prompts.

4. Press the Takeoff button and confirm that the safety takeoff conditions have been met. The

aircraft will hover at 1.5 meters above the ground. At the same time, the virtual sticks will appear in

the interface.

Landing

1. Click the RTH or Vertical Landing button and confirm that the safety landing conditions

have been met before landing.

2. The user can click “Ⓧ” in the screen to exit landing.

3. The aircraft will land on the ground, and the motor will automatically stop running.

4. Power off the aircraft.

※ In case of emergency in the air, the stick can issue an emergency stop, which will result in the aircraft

falling to the ground.

※ If flight is controlled by the controller, it can be connected to a mobile phone for real-time viewing of the

flight interface.