User Manual

40
Steps:
1. Power on the remote control and then the aircraft, then connect the mobile phone to the remote
controller. At this time, the aircraft will begin its self-check, accompanied by a beeping sound.
2. After the beep stops, click on APP, and select page of “General Settings”; click
“Calibrate” on the right; it enters into mode of compass calibration when the yellow light keeps
on, the magnetometer calibration mode is enabled.
3. Start magnetometer calibration. Hold the aircraft and rotate it clock-wisely and
horizontally. Observe the color of the LED indicator light in the aircraft and go to the next step
when the LED indicator turns solid white light. Otherwise, please return to the step 2.