User Manual

20
Finally, tighten the screws.
 Screw
 Clamp
 Blade
④ Motor shaft
slot
The process of propeller disassembly is as follows. First, remove the screws. Then rotate the clamp
of the Type A propeller rightwards or the clamp of Type B propeller leftwards 45 degrees, then
remove the clamp. Finally, remove the propeller.
Anti-Shooting Propellers
The anti-shooting propellers provide a safety guarantee in addition to screw locking. Even if the
screws are loose, the anti-shooting propellers prevent the propellers from being released. The hook
of the propeller clamp fits with the slot of the motor shaft. The motor shaft cannot be removed until
the clamp is rotated to a proper angle.
Battery
The product is provided with a high-performance smart lithium battery (4000mAh and 11.4V).
Power On and Off
Press the power switch once and hold for 2 seconds to power on/off the aircraft.
Power Check
Press the power switch once to check the remaining power when the aircraft is OFF.