User Manual

17
1. Click the smart function button “ ”, and select “Follow Me” in the pop-up interface to
enter Follow me mode. A target selection prompt will appear.
2. Select the target by one of two means:
A. Double-click: double-click the face or pedestrian icon on the screen to detect the target. After the
target is selected, a green cursor prompt will appear on the screen.
B. Box selection: press your finger on the screen and drag a box until the selected area fully covers
the target outline. After the target is selected, a green cursor prompt will appear on the screen.
Once the target is selected, the aircraft will track the object using the gimbal camera, and follow
the target at a certain distance.
3. Stop Follow Me mode or reselect the target.
The “STOP” button is located on the left of the GDU Mini APP flight interface. Click it to cancel the
current follow me command. Then “EXIT” will appear, and the aircraft will hover. Follow me mode
can be enabled again by double-clicking or box selection as described above. Then “EXIT” will
change to “STOP”, and the aircraft will switch to Follow me mode.
4. If “EXIT” is clicked, the aircraft will exit Follow me mode and hover in its current position.
Vision Circle
Operating steps:
1. Click the smart function button “ ”, and select “Vision circle” in the pop-up interface to
enter Vision circle mode. The prompt for the user to select the target will then appear.
2. Select the target by means of double-clicking or box selection. The aircraft will then fly around
the target.
The direction and speed of flight around the target can be adjusted through the slide bar on the
GDU Mini APP interface.
3. Stop the Vision circle mode or reselect target.
1) The “STOP” button is located on the left of the GDU Mini App flight interface. Click it to exit
Vision circle mode. Then “EXIT” will appear, and the aircraft will hover. Vision circle mode can
be re-enabled by double-clicking or box selection. Then “EXIT” will change to “STOP”, and the
aircraft will fly in Vision circle mode.
4. If “EXIT” is clicked, the aircraft will exit Vision circle mode and hover in its current position.
Gesture Shot
Operating steps: