Use and Care Guide

8
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly - Standard Ceiling Mount
Install the hanger rod assembly
□
2
Loosen the two screws (CC) on the motor assembly (F).
Disassemble the parts on the hanger rod assembly (B)
R pin (FF), cross pin (JJ), screw (DD), external washer
(EE), hanger ball (HH), and cross pin (GG).
□
□
Pass the wires on the motor assembly (F) through
the lower canopy assembly (E), upper canopy (C),
hanger ball (HH), and down rod (II).
Use cross pin (JJ) and R pin (FF) to connect the
down rod (II) to the motor assembly, and tighten the
screw (CC) on the motor assembly to x the down
rod (B).
CC
F
C
E
FF
F
HH
JJ
CC
Hanger rod assembly (B)
DD
EE
FF
GG
HH
JJ
II