Warranty

Page 3/8
Material Safety Data Sheet
Printing date 04/17/2014 Reviewed on 04/17/2014Version Number 1.0
Trade name: Vycor Pro (Flashing Tape)
(Cont. from page 2)
35.0.20
6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:
Not applicable.
Methods and material for containment and cleaning up:
Collect scraps then place in a suitable container.
Sweep up refuse and put into receptacles.
Pick up release liners to avoid slipping hazard.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
Handling:
Precautions for safe handling
Film may be slippery when wet or covered with frost.
Avoid eye and skin contact with residue from adhesive.
Release liners are slippery. Remove from work area immediately after membrane application.
To avoid skin contact, use gloves. Clean hands after contact with adhesive residue.
Release liners may cause slip and trip hazards.
Information about protection against explosions and fires:
Removal of release liner may generate a static electrical discharge (spark).
Storage:
Information about storage in one common storage facility:
No special measures required.
Further information about storage conditions:
-
Specific end use(s)
No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:
No further data; see item 7.
(Cont. on page 4)
USA