Installation Guide

COLUMN/POST BASE
TENSION TIE-DOWNS/SILL PLATE CONNECTORS
40
39
Notes:
1. Visit www.graceconstruction.com for the
most current details, installation video and
product literature for furthere information
2. Apply Grace Vycor Deck Protector
®
onto
pressure treated wood wherever galvanized
connectors would come into contact with
pressure treated wood
3. Fasten galvanized connector per manufac-
turer guidelines and use appropriate
hot-dipped galvanized fasteners per
ASTM A153
4. All exposed Grace Vycor Deck Protector
should be trimmed flush to galvanized
connector to prevent UV exposure
5. Grace Vycor Deck Protector does not need
to be trimmed if covered with decorative
trim or other appropriate material
Column/Post Base VCRDET-302
Notes:
1. Visit www.graceconstruction.com for the
most current details, installation video and
product literature for furthere information
2. Apply Grace Vycor Deck Protector
®
onto
pressure treated wood wherever galvanized
connectors would come into contact with
pressure treated wood
3. Fasten galvanized connector per manufac-
turer guidelines and use appropriate
hot-dipped galvanized fasteners
per ASTM A153
4. If Grace Vycor Deck Protector is to be
exposed to UV, it should be trimmed
flush to galvanized connector to prevent
UV exposure
Tension Tie-Downs/Sill Plate Connectors VCRDET-303