Installation Guide

TIE-IN WITH VINYL SIDING AT WINDOW SILL

SILL PLATE OPTIONS

Sill Plate Options VCRDET-106

Notes:

1. For the most current details, installation

video and product information, see our

web site at www.graceconstruction.com

2. RIPCORD

(Split Release on Demand) can

be removed from Grace Vycor

Plus for

ease of installation

3. Remove weather-resistive barrier from

top of window sill plate

4. Install sill flashing as shown at left

5. Install Grace Vycor Plus around remaining

window unit per Grace Window Details

(VCRDET-100 to 105)

6. Install Grace Vycor Plus and weather-

resistive barrier to form water-shedding

laps

5. Option C: Install wooden furring strip on

top of wooden siding prior to Grace Vycor

Plus

6. Detail also relevant for Grace Vycor V40

Notes:

1. For the most current details, installation video and product

information, see our web site at www.graceconstruction.com

2. RIPCORD

(Split Release on Demand) can be removed from

Grace Vycor

Plus for ease of installation

3. Install Grace Vycor Plus and weather-resistive barrier to form

water-shedding laps

4. Remove weather-resistive barrier from top of window sill plate

5. Leave release paper on lower half of Grace Vycor Plus Sill

Flashing until future tie-in

6. Extend Grace Vycor Plus over nailing flange of the last com-

plete course of siding panel and trim Grace Vycor Plus to

protect from permanent exposure to UV

7. Install Grace Vycor Plus around remaining window unit per

Grace Window Details (VCRDET-100 to 105)

8. Detail also relevant for Grace Vycor V40

9. Leave release paper on or other bond breaker between Grace

Vycor Plus and vinyl

Tie-in with Vinyl Siding at Window Sill VCRDET-107