Installation Guide

FLANGED WINDOW – LOW EXPOSURE
FLANGED WINDOW
Flanged Window VCRDET-101
Option 1 - Low Exposure
28
27
Head flashing tie-in instructions:
1. Cut, fold up and temporarily secure
weather-resistive barrier above header to
allow for flashing installation
2. Install Grace Vycor
®
Plus head flashing
under weather-resistive barrier
3. Fold weather-resistive barrier back over
head flashing and seal with tape
Notes:
1. For the most current details, installation
video and product information, see our
web site at www.graceconstruction.com
2. RIPCORD
®
(Split Release on Demand) can
be removed from Grace Vycor Plus for
ease of installation
3. Remove weather-resistive barrier from top
of window sill plate
4. Install Grace Vycor Plus in order
shown by numbers
5. Install Grace Vycor Plus and weather-
resistive barrier to form water-shedding laps
6. Detail also relevant for Grace Vycor V40
Notes:
1. For the most current details, installation video
and product information, see our web site at
www.graceconstruction.com
2. RIPCORD
®
(Split Release on Demand) can be
removed from Grace Vycor
®
Plus for ease of
installation
3. Install Grace Vycor Plus in order as shown
by numbers
4. If applicable, leave release paper on lower
half of sill flashing until future tie-in
5. Install Grace Vycor Plus and weather-resistive
barrier to form water-shedding laps
6. Detail also relevant for Grace Vycor V40
Flanged Window VCRDET-100
Flashing Installation After Weather-Resistive Barrier
APPLICATION DETAILS