GCL Installation Guide

GCL System Integration Technology Co.,Ltd
Bringing Green Power to Life
03
Modules Carry and Installation Instruction
Both hands when handling Modules Ensure Modules are xed properly Do not use sharp objects with Modules
Do not pulling the wiring cables
or junction box
Do not stamp on Modules
Do not touch Modules with
bare or dirty hands
Do not pile up Modules on
uneven ground
Do not drop or throw Modules
Do not stamp on Modules or put weight on Modules.
Do not disassemble or drop Modules.
Do not use mirrors or magniers concentrated sunlight onto Modules.
Do not lift the module by grasping the junction box.
Do not use any sharp object with Modules.
Do not directly apply pressure on the glass surface or backsheet of Modules.
Must use both hands to carry Modules.
Do not touch the surface of the coated glass with bare hands.
Ensure all contacts and the operating environment are clean and dry.
Keep all the Modules and electrical connectors clean and dry before installation.
Use dry and ventilated room when storing uninstalled modules.
Use both hands to carry Modules. Do not overlap Modules.
Be cautious when carrying Modules. Slip-proof gloves are necessary.
Use supportive disassembling tools when unpacking .
Unpacking and Storage
SAFETY&TRANSPORT