Installation Instructions

*
Consult an installation professional to receive instructions specific to your application. This manual has been provided as a general overview
and may not apply to every application.
Edges of the cut tile can be chamfered with a diamond hand pad. Hand pads and related glass tile
cutting tools are available through 3M Corporation as well as a variety of other glass tool distributors
found on the Internet. Silicon carbide sanding belts may be used if the belt is dressed with a light
coat of silicone spray.
CLEANING
GBM glass tiles can be routinely cleaned with any non-abrasive cleaning compound or formula that
is recommended for both glass and tile. Most day to day cleaning can be done with just a dry
microfiber cloth. DO NOT USE acids to clean GBM glass tiles as it may scratch the surface of the
tile.