User Manual

o 2. QR Code Scan
 Using the camera in your mobile device, scanning the QR code
affixed to the back of the IP Doorbell will automatically populate
the GID in the device settings.
o 3. Manual
 This option allows you to manually input the GID of the IP
Doorbell in to the device settings, useful if your mobile device is
not on the same network as the IP Doorbell.
- Enter the name in ‘Device Name’ that you want to identify the IP Doorbell (e.g.
Front Door). This name will be specific to the App of each mobile device. *You
may use spaces or other special characters in the name, but only on iOS devices.
- Enter the ‘User Name’ (default is ‘admin’).
- Enter the ‘Password’ (default is ‘1234’).
- Tap ‘Done’.
- Re-enter the device settings and turn on the ‘Outdoor call-in’.
- *After correct configuration it may take a few moments for the IP Doorbell to
make the initial connection through the cloud service.
- *Unlock Password can be changed in the App as well as through the Web. Browser
Interface. This will change the password for all users of the IP Doorbell. It also
changes the password required in the device settings. You may need to update the
password in the device settings of the ControlCam App in each mobile device.
Android Devices:
- Download and/or open the ‘ControlCam’ App.
- Tap on ‘Enter Now’ *Note: Do not tap ‘Add a New Device’.
- Tap ‘Add a Device’.
- Tap ‘Add a Network Device’ *Note: Do not tap ‘Add a New Device’.
- You now have 3 options for adding the IP Doorbell.
o 1. LAN Search
 If your mobile device is on the same network as your IP Doorbell,
you can tap ‘LAN Search’ and a list of GID’s of IP Doorbells
installed on your network will display.
 Choose the GID of the IP Doorbell you want to add. GID’s in
yellow have already been added to this instance of the ControlCam
App.
o 2. QR Code Scan
 Using the camera in your mobile device, scanning the QR code
affixed to the back of the IP Doorbell will automatically populate
the GID in the device settings.
o 3. Manually Input
 This option allows you to manually input the GID of the IP
Doorbell in to the device settings.