User Manual

25
2. Making Booklets
SquareFolding
General
The SquareFolder has ve different settings; [Off], [Mode 1], [Mode 2], [Mode 3] and [Auto].
Select [Off] to bypass the SquareFolding action.
Select manual mode as follows depending on the number of sheets in the set.
Mode 1: Approximately 6 to 11 sheets. Decreased amount of square forming.
Mode 2: Approximately 12 to 16 sheets. Medium amount of square forming.
Mode 3: Approximately 17 to 25 sheets. Maximum amount of square forming.
In [Auto] mode, the Booklet Maker detects how many sheets there are in the booklet, and
automatically set the SquareFolder to the correct mode.
Note
When the SquareFolder is set to [Auto] and the booklet has less than approximately 6
sheets/booklet, the SquareFolder will bypass the Square folding action, transporting
the booklet out to the Belt stacker. Use the manual modes to override the auto function.
The [Auto] mode can not be use when the Booklet Maker is hand fed. If SquareFolding
is desired when hand feeding, use the correct manual mode.
•
•
Procedure
From the Main screen, scroll down to SQF and press
the [Enter] button.
Select [Auto], [Mode 1], [Mode 2], [Mode 3] or [Off]
with the [arrow] button and press the [Enter] button.