Operation Manual

Repairings

Removing the front wheel

• Thebelowinstructionsareanadditiontothe

actions described in the general Gazelle user

manual. You must first follow the below instructions

before you can remove the front wheel.

• Removethebatteryfromthebike(seeprevious

instructions).

• Loosenthetwoscrewsoftheconnectorcapon

the front fork using a size 4 Allen key. (Photo 47)

• Removethefrontpartofthecap.(Photo 48)

• Withdryhands,carefullyremovetheconnectorin

the transparent crimp sheath from the casing,

gently pulling the two ends apart. It’s possible that

you may first need to cut the cable tie located on

the lower section of the crimp sheath. Leave the

crimpsheathinplaceontheupperconnector/

cable. (afb. 48

+ 49)

• Avoid all contact with the contact pins of the

plugs.

• Holdthebottompartofthecableandcarefully

take it out of the 2 cable guide brackets. Make sure

that you do not damage the cable and plug. The

upper bracket is located in the area of the

mudguard attachment (see 1 on Photo 50), the

lower bracket is situated beneath the front axle’s

cap nut (see 2 on Photo 50).

• Nowloosenthecapnutsandfollowthe

instructions for replacing a wheel in the general

user manual.