Use and Care Manual

7
ZZZ-205.43226.0831-17.GP.EN.HER SUN-HP
Step 13:
Install the upper
crossbars on the
interior of the roof
using bolts “Pp”,
following the
shaped ends and
letters. Do not
tighten bolts
immediately; install
loose and tighten
once all crossbars
are in place.
Repeat this step
with the lower
crossbars.
Step 14:
a) Secure each foot plate into
the ground using screws “Rr”
and washers “Tt”.
b) Use lag shields (Ss) if
needed for harder surfaces.
Pp
Pp
Pp