Use and Care Manual

ZZZ-205.43226.0831-17.GP.EN.HER SUN-HP

Step 9:

Slide the indicated

polycarbonate panels into

the spaces between the

rafters, using the top

groove of each rafter.

Ensure the side meant to

face the sun is on the

outside. Use a rubber

hammer to carefully tap

each panel into the

grooves.

Step 10:

Insert the middle roof joints in between the rafters and slide them up under the polycarbonate panels.

Tap lightly to ensure the panel is fully in the slot. Seen from above, most of the joint as well as the

drain holes should be beneath the roof panels.