Use and Care Manual

ZZZ-205.43226.0831-17.GP.EN.HER SUN-HP

Step 5:

Attach mounting brackets “O” to rafters “M”, and mounting brackets “P” to rafters “N” and “N-2”. Use

threaded hole about 8” from end of rafter.

Lift central hub “L” to a height of about 110” (2.79m) at the center of the gazebo. (Caution: this part

may be heavy, use support as needed)

Attach one end of rafter “M” to the hub using 1 bolt “Pp”. Attach other end with mounting bracket to

the corner of the beam assembly with 2 bolts “Pp”. Use the set of holes closest to the inside. Repeat

with remaining “M” rafters.

Similarly, attach one end of rafter “N” to the hub using 1 bolt “Pp”. Attach other end with mounting

bracket to the beam assembly with 2 screws “Qq”. Use the set of holes closest to the inside. Repeat

with remaining “N” and “N-2” rafters.

Step 6:

Once all rafters are in place, install top

cap “K” over central hub “L”. Use flat

washers and acorn nuts “Vv” to secure

tightly.