Installation Guide

ZZZ-205.43226.0115-21.GP.EN.doc WEB VERSION 8

Step 5:

1. Attach Mounting Brackets “O” to Rafters “M”, and Mounting Brackets “P” to Rafters “N” and “N-

2”. Use threaded hole about 8½” & 5” from end of Rafter.

2. Lift Central Hub “L” to a height of about 110” (2.79m) at the center of the gazebo. (Caution: this

part may be heavy, use support as needed)

3. Attach one end of Rafter “M” to the Hub using 1 Bolt “Pp”. Attach other end with Mounting

Bracket to the corner of the beam assembly with 2 Bolts “Pp”. Use the set of holes closest to

the inside. Repeat with remaining “M” Rafters.

4. Similarly, attach one end of Rafter “N” to the Hub using 1 Bolt “Pp”. Attach other end with

Mounting Bracket to the beam assembly with 2 Screws “Qq”. Use the set of holes closest to

the inside. Repeat with remaining “N” and “N-2” Rafters.

Step 6:

1. Once all Rafters are in place,

install Top Cap “K” over Central

Hub “L”. Use flat Washers and

Acorn Nuts “Vv” to secure tightly.