Installation Guide

ZZZ-205.43226.0115-21.GP.EN.doc WEB VERSION 12
Step 13:
Install the upper
crossbars on the
interior of the roof
using Bolts “Pp”,
following the
shaped ends and
letters. Do not
tighten bolts
immediately; install
loose and tighten
once all crossbars
are in place.
Repeat this step
with the lower
crossbars.
Step 14:
a) Secure each foot plate into
the ground using Screws “Rr”
and Washers “Tt”.
b) Use Lag Shields (Ss) if
needed for harder surfaces.
Pp
Pp
Pp